Products Description
When your clinical team needs reliable fluid protection without the bulk of heavy surgical gowns, a CPE isolation gown offers a practical middle ground. CARESTAR's version is built from 45gsm chlorinated polyethylene – softer than standard PE, quieter, and more resistant to tearing. It is not designed for high‑pressure surgical splashes (that is SMS territory), but for everyday isolation, blood draws, dental work, and ER holding areas, it performs reliably.
Raw Material for a choice:
- Breathable fabric SBPP, SMS, Microporous, or Spunlace
- PE Coated Nonwoven fabric
- PE or CPE film, mainly for thumb loop gowns
- Complies with AMMl Level 1 or Level 2 standard, AATCC 42 / AATCC 127Complies with the requirement of Medical Device Regulation (EU)2017/745
What Makes Our CPE Isolation Gown Different?
Most cheap PE gowns feel like wearing a plastic bag. Our CPE isolation gown uses a modified polymer that stays flexible even in warm environments. Key features that actual nurses and dentists tell us matter:
- Thumb loops – Prevents sleeve migration during gloving. No more taping.
- Elastic cuffs – Snug but not tight, keeps fluids from running down the arm.
- Open back with tie closure – Breathable for long shifts, yet fully covering when tied.
- Latex‑free & non‑sterile – Safe for latex‑sensitive staff; sterile version available on request.
We have also run internal AATCC 42 (impact penetration) and hydrostatic pressure tests – contact our compliance team for the full report.
Technical Specifications of CARESTAR CPE Gown
| Parameter | Value |
|---|---|
| Material | Chlorinated Polyethylene (CPE), 45gsm |
| Protection Level | AAMI Level 2 (moderate fluid barrier) |
| Color | Blue, Yellow, White (custom colors available ≥ 50k pcs) |
| Sizes | S, M, L, XL, XXL, XXXL |
| Cuff Style | Elastic (standard), knitted cuff (optional) |
| Closure | Tie back at neck and waist |
| Thumb Loops | Yes, integrated |
AAMI Level 2 Protection: Where Can You Use This Gown?
A CPE isolation gown rated AAMI Level 2 passes critical tests for resistance to fluid penetration under pressure up to a certain range. According to ANSI/AAMI PB70:2022, Level 2 suits these everyday scenarios:
- Emergency department – suturing, IV insertion, wound irrigation
- Dental clinics – scaling, polishing, minor oral surgery splatter
- Blood draw stations – potential splashes of blood or reagents
- General patient care – bathing, changing linens, handling body fluids
- Nursing homes – routine hygiene assistance, incontinence care
- Visitor gowns – when entering isolation or immunocompromised rooms
For surgical operations or procedures with high‑volume fluid spray, move to Level 3 or 4 – but for 80% of hospital isolation needs, Level 2 CPE is the most cost‑efficient choice.
Products FAQ:
Frequently Asked Questions About CPE Isolation Gowns
Q: Can CPE gowns protect against COVID‑19 or other viruses?
A: A CPE isolation gown is a fluid‑barrier device. It reduces exposure to virus‑laden droplets, but it is not a viral penetration‑tested garment (ASTM F1671). For airborne or high‑risk aerosol‑generating procedures, an SMS gown or higher level is recommended.
Q: Is the CPE material breathable?
A: The film itself is not porous, but our gown features an open back design and loose ties, allowing airflow. For extended wear in hot environments, consider our SMS or microfiber options.
Q: Do you provide samples before bulk order?
A: Yes. We ship samples within 48 hours. Contact our sales team with your shipping address.
Q: What is the lead time for 100,000 pcs?
A: For standard blue CPE isolation gowns, 15‑20 days after deposit. Custom colors or logos add 5‑7 days.
Q: Are these gowns FDA registered?
A: Yes. CARESTAR is a FDA registered facility. Our CPE isolation gown is listed under FDA 510(k) exempt Class I medical device. Ask for our FDA registration number.
Hot Tags: carestar aami level 2 cpe isolation gowns, China carestar aami level 2 cpe isolation gowns manufacturers, suppliers, factory
